Quick-Check 20 Zone Purity Manifold
Checks each AutoPurge System for nitrogen purity and flow displays reading on PLC daily
Analog 0-10V, 4-20mA signals available
Ethernet communication included for remote access
Automatically opens and closes AutoPurge System® to ensure 98% nitrogen purity is maintained within Fire Protection System
Ethernet communication included for remote access
Ethernet communication included for remote access
DeOx-Dx-1M
1,000 gal. per hour
Reduces oxygen in both trapped air pockets, and fill water
16 GPM of deoxygenated water @ < 1.0ppm
Fully pneumatic – no electrical required
Ethernet communication included for remote access
Ethernet communication included for remote access
DeOx-Dx-3M
3,000 gal. per hour
Reduces oxygen in both trapped air pockets, and fill water
48 GPM of deoxygenated water @ < 1.0ppm
Fully pneumatic – no electrical required
Ethernet communication included for remote access
Ethernet communication included for remote access
Dual Vent 02-Release
FailSafe™ design works as a true water stop
Water accumulation fully drains back to FPS by depressurizing FPS and pressing reset button on Air Release Valve
9V Lithium ion battery with low battery buzzer and visual LED indicator
Fully pneumatic – no electrical required
Ethernet communication included for remote access
Ethernet communication included for remote access
Only one connection to the piping
N2 Inert System Input
Reduces oxygen levels within any wet FPS
Effectively displaces all trapped air within a wet system with pure nitrogen
Includes injection port to connect nitrogen supply and exhaust port
Requires nitrogen supply
Ethernet communication included for remote access
Ethernet communication included for remote access
High Pressure Regulator Kit
Connection point for nitrogen source
For use with high pressure nitrogen cylinder or liquid nitrogen dewar
Includes 10’ hose with quick connect nipple
Fully pneumatic – no electrical required
Ethernet communication included for remote access
Ethernet communication included for remote access
Quick-Check Portable Purity Sensor
Automatic Shutoff
Battery operated, hand-held nitrogen analyzer verifies that desired nitrogen purity is achieved within all zones
Connects to an AutoPurge System or Quick-Check Sampling Port
Easy to use one touch calibration
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 500
For up to 500 gal. of total sprinkler pipe capacity
Optional STS-NF-QF-2 air compressor available for quick-fill operation (635 gal. @ 40 PSI)
Integrated air compressor (not intended for quick-fill)
28 gal. nitrogen receiver tank
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 900
For up to 900 gal. of total sprinkler pipe capacity
Optional STS-NF-QF-2 air compressor available for quick-fill operation (635 gal. @ 40 PSI)
Integrated air compressor (not intended for quick-fill)
28 gal. nitrogen receiver tank
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 1650
For up to 1,650 gal. of total sprinkler pipe capacity
Optional STS-NF-QF-2 air compressor available for quick-fill operation (635 gal. @ 40 PSI)
Integrated air compressor (not intended for quick-fill)
Integrated nitrogen receiver tank
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 3250
For up to 3,250 gal. of total sprinkler pipe capacity
Integrated Air Dryer and N2 receiver tank
Requires separate feed air compressor
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 5000
For up to 5,000 gal. of total sprinkler pipe capacity
Integrated Air Dryer and N2 receiver tank
Requires separate feed air compressor
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 10000
For up to 10,000 gal. of total sprinkler pipe capacity
Integrated Air Dryer and N2 receiver tank
Requires separate feed air compressor
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 16500
For up to 16,500 gal. of total sprinkler pipe capacity
Integrated Air Dryer and N2 receiver tank
Requires separate feed air compressor
Ethernet communication included for remote access
Ethernet communication included for remote access
N2BLAST 22500
For up to 22,500 gal. of total sprinkler pipe capacity
Integrated Air Dryer and N2 receiver tank
Requires separate feed air compressor
Ethernet communication included for remote access
Ethernet communication included for remote access
AIR COMPRESSOR
Ethernet communication included for remote access
Ethernet communication included for remote access
3-5 CS Series
710 -CS Series
3-5 CS Series
Quick-Fill Compressor
J Series
MODELS
AutoPurge 2
No electrical required
Purges FPS piping to ensure entire system is blanketed with 98%+ nitrogen purity
Patented, calibrated orifice custom tunes to each individual riser based on its total capacity (gallons), minimizing runtime of N2Blast
Ethernet communication included for remote access
Ethernet communication included for remote access
One AutoPurge is required per dry or pre-action system
AutoPurge Timer
Manual reset to resume purging when the FPS is tested or trips
Purge automatically turns to the “closed” position after 5 weeks (field adjustable)
Eliminates the continuous venting of the AutoPurge System/s by closing the purge after 98%+ nitrogen (i.e., the desired purity level to inhibit corrosion) has had sufficient time to cycle throughout the FPS
Ethernet communication included for remote access
Ethernet communication included for remote access
Sampling Port
Provides additional location to check nitrogen purity concentration within sprinkler piping
One or multiple Sampling Ports can be installed on any zone which already has an AutoPurge System
No electrical required
Ethernet communication included for remote access
Ethernet communication included for remote access
Quick-Check 6 Zone Purity Manifold
Checks each AutoPurge System for nitrogen purity and flow displays reading on PLC daily
Ethernet communication included for remote access
Analog 0-10V, 4-20mA signals available
Ethernet communication included for remote access
Ethernet communication included for remote access
Automatically opens and closes AutoPurge System® to ensure 98% nitrogen purity is maintained within Fire Protection System
Portable Nitrogen Purity Sensor
Connects to an AutoPurge System or Quick-Check Sampling Port
Easy to use one touch calibration
Automatic Shutoff
Ethernet communication included for remote access
Ethernet communication included for remote access
Battery-operated, hand-held nitrogen analyzer verifies that desired nitrogen purity is achieved within all zones
Quick-Check 1 Zone Purity Manifold
Checks each AutoPurge System for nitrogen purity and flow displays reading on PLC daily
Analog 0-10V, 4-20mA signals available
Ethernet communication included for remote access
Ethernet communication included for remote access
Ethernet communication included for remote access
Automatically opens and closes AutoPurge System® to ensure 98% nitrogen purity is maintained within Fire Protection System
Quick-Check 10 Zone Purity Manifold
Checks each AutoPurge System for nitrogen purity and flow displays reading on PLC daily
Analog 0-10V, 4-20mA signals available
Ethernet communication included for remote access
Ethernet communication included for remote access
Ethernet communication included for remote access
Automatically opens and closes AutoPurge System® to ensure 98% nitrogen purity is maintained within Fire Protection System
Quick-Check 20 Zone Purity Manifold
Checks each AutoPurge System for nitrogen purity and flow displays reading on PLC daily
Analog 0-10V, 4-20mA signals available
Ethernet communication included for remote access
Ethernet communication included for remote access
Ethernet communication included for remote access
Automatically opens and closes AutoPurge System® to ensure 98% nitrogen purity is maintained within Fire Protection System
Quick-Fill Compressor
Designed for efficiency and quickly fills up to 635 gallons within 30 minutes (0 -40-PSI)
To be utilized only for the sprinkler pipe quick fill operation. Not intended to be used as a constant means of maintaining supervisory pressure
2 HP piston, oil-less
Ethernet communication included for remote access
Ethernet communication included for remote access
Compressed air flow output of 7.7 SCFM at 40 PSI
Feed Air Compressor-3-CS
Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
Oil lubricated accumulator tank
Aftercooler, magnetic starter, low oil monitor
Ethernet communication included for remote access
Ethernet communication included for remote access
Vibration isolator pads
Pneumatic auto-drain off of the air receiver tank
Feed Air Compressor-5-CS
Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
Oil lubricated accumulator tank
Aftercooler, magnetic starter, low oil monitor
Ethernet communication included for remote access
Ethernet communication included for remote access
Vibration isolator pads
Pneumatic auto-drain off of the air receiver tank
Feed Air Compressor-7-CS
Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
Oil lubricated accumulator tank
Aftercooler, magnetic starter, low oil monitor
Ethernet communication included for remote access
Ethernet communication included for remote access
Vibration isolator pads
Pneumatic auto-drain off of the air receiver tank
Feed Air Compressor-7HD-CS
Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
Oil lubricated accumulator tank
Aftercooler, magnetic starter, low oil monitor
Ethernet communication included for remote access
Ethernet communication included for remote access
Vibration isolator pads
Pneumatic auto-drain off of the air receiver tank
Feed Air Compressor-10-CS
Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
Oil lubricated accumulator tank
Aftercooler, magnetic starter, low oil monitor
Ethernet communication included for remote access
Ethernet communication included for remote access
Vibration isolator pads
Pneumatic auto-drain off of the air receiver tank
Feed Air Compressor-5D-CS
Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
Duplex Piston, Oil lubricated
Automatic alternating controller with capability of manual lead/lag settings
Ethernet communication included for remote access
Ethernet communication included for remote access
Aftercooler, plus added filtration to ensure clean, dry, oil free air
Vibration isolator pads
Feed Air Compressor-7D-CS
Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
Duplex Piston, Oil lubricated
Automatic alternating controller with capability of manual lead/lag settings
Ethernet communication included for remote access
Ethernet communication included for remote access
Aftercooler, plus added filtration to ensure clean, dry, oil free air
Vibration isolator pads
Feed Air Compressor-10D-CS
Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
Duplex Piston, Oil lubricated
Automatic alternating controller with capability of manual lead/lag settings
Ethernet communication included for remote access
Ethernet communication included for remote access
Aftercooler, plus added filtration to ensure clean, dry, oil free air
Vibration isolator pads
N2GEN HPCF-K0
Built-in, user friendly PLC with 3.5" color touchscreen
Ethernet communication included for remote access
Ethernet communication included for remote access
Auto-off when cylinder fill is complete
Manual start/stop capability
Attached fill stand with 2, 4 or 6 high pressure leads and stability straps
Fill alternate size cylinders up to 2200 psig or 3000 psig
Integrated, low maintenance, air powered N2 booster
Easily connects to external source of required compressed air (not included)
N2GEN HPCD-01D
Heavy duty weather-proof case with protectors to shield from water
Ethernet communication included for remote access
Ethernet communication included for remote access
Fully integrated, self-contained system, with twin oil free air compressors, heavy-duty N2 membrane separator, low pressure N2 tank, and two stage direct drive booster
Auto shutoff, inlet/outlet gauges, hour meter
9" diameter, high tread rubber wheels with extended handles on opposite end for easy transport across various terrain
Fold out, pin lock, wheel assembly that easily folds out of the way for lifting and transport
N2GEN-4
99% nitrogen purity
Ethernet communication included for remote access
Ethernet communication included for remote access
Capable of delivering nitrogen up to 100 psig
Oil-free nitrogen delivery
Wall or shelf mount capability
Completely integrated with on-board air compressor and separate N2 tank
Replaces current nitrogen charging purge kits
Sustainment and field level platforms available
Military and commercial air transportable
US Army/USMC/TM published on ILnet
N2 GEN 4-HC
Durable, easily transportable case allows for portability
Ethernet communication included for remote access
Ethernet communication included for remote access
99% nitrogen purity
Capable of delivering nitrogen up to 80 psig
Oil-free nitrogen delivery
Field condition durability
Operates fully protected with case closed
Integrated 1/2 HP oil-free compressor
Mobile protective hard case
Military and commercial air transportable
US Army / USMC / TM published on MILnet
Total weight of 175 lbs.
Regular Air Maintenance Device
Ethernet communication included for remote access
Ethernet communication included for remote access
South-Tek’s Regular Air Maintenance Device (RAMD) is a pressure regulating device that will keep nitrogen or air pressure at the correct level in dry pipe and prepare-action fire sprinkler systems. RAMD is used in conjunction with sprinkler systems with automatically controlled compressed nitrogen at a pressure higher than required for proper system operation. The RAMD includes a manual bypass that, after sprinkler system maintenance or operation, allows quick filling of the sprinkler system.
N2GEN HPCF-SFI/SXC
High-pressure, gas vehicle suspensions
Ethernet communication included for remote access
Ethernet communication included for remote access
M777 recoil systems
Vehicle and aircraft tires and struts
Backpack systems (NBK and similar)
Refill fire suppression cylinders
Cylinder fill for backup N2 supplies
Any other high- or low-pressure use