Air Compressors for Life Safety Systems
South-Tek Systems’ efficient Quick Fill and Feed Air Compressors are designed to quickly fill your system within 30 minutes (0-40 PSI). Each air compressor is paired to work with a specific model of our N2Blast mission-critical nitrogen™ generator and provide the correct airflow output dependent on the size of your life safety system.
- Fills system within 30 minutes
- 0-40 PSI
- 635 – 5,750 gallon range
- Quick-fill and supervisory options
Quick-Fill and Feed Air Compressors
- Designed for efficiency and quickly fills up to 635 gallons within 30minutes (0 -40-PSI)
- To be utilized only for the sprinkler pipe quick fill operation. Not intended to be used as a constant means of maintaining supervisory pressure
- 2 HP piston, oil-less
- Compressed air flow output of 7.7 SCFM at 40 PSI
- Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
- Oil lubricated accumulator tank
- Aftercooler, magnetic starter, low oil monitor
- Vibration isolator pads
- Pneumatic auto-drain off of the air receiver tank
- Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
- Oil lubricated accumulator tank
- Aftercooler, magnetic starter, low oil monitor
- Vibration isolator pads
- Pneumatic auto-drain off of the air receiver tank
- Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
- Oil lubricated accumulator tank
- Aftercooler, magnetic starter, low oil monitor
- Vibration isolator pads
- Pneumatic auto-drain off of the air receiver tank
- Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
- Oil lubricated accumulator tank
- Aftercooler, magnetic starter, low oil monitor
- Vibration isolator pads
- Pneumatic auto-drain off of the air receiver tank
- Compressed air flow output of 14 SCFM to 36.9 SCFM at 125 PSI
- Oil lubricated accumulator tank
- Aftercooler, magnetic starter, low oil monitor
- Vibration isolator pads
- Pneumatic auto-drain off of the air receiver tank
- Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
- Duplex Piston, Oil lubricated
- Automatic alternating controller with capability of manual lead/lag settings
- Aftercooler, plus added filtration to ensure clean, dry, oil free air
- Vibration isolator pads
- Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
- Duplex Piston, Oil lubricated
- Automatic alternating controller with capability of manual lead/lag settings
- Aftercooler, plus added filtration to ensure clean, dry, oil free air
- Vibration isolator pads
- Compressed air flow output of 34 SCFM to 70 SCFM at 125 PSI
- Duplex Piston, Oil lubricated
- Automatic alternating controller with capability of manual lead/lag settings
- Aftercooler, plus added filtration to ensure clean, dry, oil free air
- Vibration isolator pads
- Designed for efficiency and quickly fills up to 900 gallons within 30 minutes (0-40 PSI)
- 2hp piston, oil lubricated with aftercooler
- 17 gal. accumulator tank with pneumatic auto drain
- Compressed air flow output of 7.6 SCFM at 125 PSI
- Vibration isolator pads
N2Blast – Dry Sprinkler System Nitrogen Generator
Our air compressor options meet the needs of South-Tek Systems’ N2Blast mission-critical nitrogen™ product line. N2Blast is a Corrosion Inhibiting System designed to protect fire protection sprinkler systems from corrosion. Using the AutoPurge System, oxygen is displaced with nitrogen. Oxygen is a key contributor to the corrosion reaction, reducing its presence in a dry or pre-action fire protection system significantly extends the system life.
design works as a true water stop