Membrane Technology, Nitrogen Membrane, Membrane Generator

Membrane Technology (up to 99.5% purity)

South-Tek Systems uses Membrane Techology in select Nitrogen gas generation systems and products. A Nitrogen Generator using Membrane Technology has the following characteristics:

Least expensive N2 production method
High N2 purities, or high N2 volumes at lower purity levels
High reliability due to simple airflow design
Utilizes lower operating and delivery pressures

Membrane technology in our Nitrogen Generators allows industrial facilities to produce high purity Nitrogen on-site using a safe, reliable, and cost effective process.

For more detailed information about our Membrane Technology for Nitrogen gas generation, please refer to our PDF document:

Membrane - Specialty Filtration Technology

South-Tek Systems

2940 Orville Wright Way
Suite 600
Wilmington, NC 28405

Toll-Free:
Office:
Fax:

888.526.6284
910.332.4173
910.332.4178

What Is Membrane Technology?

Air separation using Membrane Technology occurs when compressed air is forced into a vessel containing a hollow tube in the middle surrounded by a polymeric hollow fiber. These hollow fibers selectively permeate oxygen, water vapor, and other impurities out of its side walls, allowing Nitrogen to flow through its center and emerge as product.

Membrane Technology is used in our N2 GEN Series Compact Nitrogen generators as well as in our BeerBlast™ and TireBlast™ products.

Please contact South-Tek Systems for more information on our Nitrogen Membrane Generators.

Basics of Membrane Technology